Dolphin Anty integration

How to Use JesusProxy with Dolphin Anty

Last updated: 15 Nov 2026

Dolphin {anty} steps checked on 15 Nov 2026 against their own documentation.

See US mobile proxy plans

What you need before you start

Everything Dolphin Anty asks for comes from one place: My Proxies in your JesusProxy dashboard, once a plan is active. The proxy is live immediately after payment, so there is nothing to wait for and no IP whitelisting to set up.

What to copy from JesusProxy into Dolphin Anty
Dolphin Anty asks forWhere it comes from
HostThe host on your proxy in My Proxies. It is a hostname, not a bare IP address.
PortThe port for the protocol you picked. HTTP and SOCKS5 are separate logins on Private, so the two have different ports: using one protocol's port with the other selected will always fail.
Username and passwordThe username and password shown with that proxy. You can edit them any time from the dashboard.
Rotation linkPrivate only. This is the link that gives the SIM a new carrier IP. Share has no rotation link, because it rotates on its own.

Two JesusProxy details decide which option you pick in Dolphin Anty. Private includes an HTTP login and a SOCKS5 login at the same time, so you can choose either; Share gives you one protocol, HTTP or SOCKS5, picked when you buy. And SOCKS5 on JesusProxy is TCP only, so UDP is not supported. Plans are $3 a day for Share and $6 a day for Private, paid from a wallet you top up by card, crypto or PayPal. See pricing for the full periods, or dedicated mobile proxy for what Private includes.

Add the proxy to a Dolphin Anty profile

Dolphin takes the proxy as a single line with the type chosen next to it, which is faster than filling four boxes but less forgiving about format. Their docs list four places you can do this: while creating a profile, while editing one, from the Proxy screen, and in bulk from the profile control panel.

  1. Start a profile and choose New Proxy

    Create or edit a browser profile, then select New Proxy. If you already saved the proxy, pick it from the list of created proxies instead.

  2. Set the type beside the line

    To the left of the proxy you choose its type. Their documented examples are http://, socks5:// and socks4://. Use the JesusProxy login that matches the type you pick.

  3. Enter the proxy in one of three formats

    Dolphin accepts host:port, host:port:login:password, and login:password@host:port. Paste one line rather than filling separate boxes.

  4. Paste the rotation link into Link to change IP

    On a Private plan, paste your JesusProxy rotation link into the Link to change IP field. Their docs say that once a rotational proxy link is inserted, an IP change button appears on the profiles screen.

  5. Check it with the arrows

    Click the arrows on the right edge of the proxy line. Dolphin checks the connection and reports the geolocation and time zone it reads for that IP.

  6. Save, launch, and confirm the exit

    Save the profile, launch it, and load our IP lookup inside the profile window to confirm the carrier and the US location.

The format matters more here than in tools with separate fields. Dolphin accepts host:port, host:port:login:password and login:password@host:port, with the type set beside the line rather than guessed from a prefix you typed. Their own examples are http://192.168.0.1:8000, socks5://login:password@192.168.0.1:8000 and socks4://192.168.0.1:8000:login:password. If a paste is rejected, the shape of the line is the first thing to check.

If you already saved the proxy, you do not need to retype it: their docs let you pick from the list of created proxies instead of choosing New Proxy. That is the better habit when one plan feeds several profiles, because then there is one record to update rather than several.

http or socks5 in Dolphin Anty

Dolphin sets the protocol as a type beside the proxy line, with http://, socks5:// and socks4:// prefixes, chosen beside the proxy line. A JesusProxy Private plan includes an HTTP login and a SOCKS5 login at the same time on separate credentials, so you can pick either without buying anything else. Share gives you one protocol, chosen when you buy.

Pick socks5 if you want DNS lookups to travel through the proxy alongside the traffic. Pick http if something in the profile expects a plain HTTP proxy. Whichever you choose, the port in the line has to be that protocol's port: on Private they are different logins with different ports, and a SOCKS5 port behind an http type fails every time.

Note the socks4 option in their list is not something we support, and our SOCKS5 is TCP only, so UDP is not supported. If a tool inside the profile needs UDP it will not go through the proxy. The protocol itself is covered on SOCKS5 mobile proxy.

Using the rotation link with Dolphin Anty

Dolphin has a dedicated field for it. Their documentation says: There is also an input line “Link to change IP”. If you have rotational proxies, then after inserting the link that is given when buying such proxies — the IP change button appears on the profiles screen.

So this is a two-part feature. You paste the link once into Link to change IP, and from then on the rotation lives on the profiles screen as a button rather than something you have to keep a browser tab for. Paste your JesusProxy Private rotation link there and nothing else changes: the host, port and login stay the same when the carrier address moves.

On our side a new IP takes about 20 to 45 seconds, so give it that long before you reload inside the profile. Manual rotations are unlimited as long as you leave at least 2 minutes between rotation requests. In normal use every rotation gives you a fresh IP; repeats are only possible with very heavy rotation, roughly 1,000 or more IPs a day. You can also skip the field and rotate on a 5, 15, 30 or 60 minute timer or from the API instead.

Whether you should press that button during a session is a different question from whether you can. For a signed-in account, an address that holds still through the session usually looks more ordinary than one that changes halfway, so most people rotate between sessions rather than inside them. The reasoning is in sticky vs rotating proxies, and the controls are on rotating mobile proxy.

How to check it works

Dolphin Anty's own check tells you the proxy answered. It does not tell you the exit looks like a US phone, and that is the part that matters for account work. Do both: use the arrows at the right edge of the proxy line to confirm Dolphin Anty can connect, then open our IP lookup inside the profile window and read the result.

Checking in your normal browser proves nothing, because that window is not using the proxy. The page has to be loaded by the profile you just configured. Three things should be true when it loads:

  • The country is the United States.
  • The carrier or network owner is T-Mobile or Verizon, not a hosting company.
  • The address is not your own home IP.

From a terminal you can check the same credentials before you ever open Dolphin Anty, which separates a bad login from a Dolphin Anty setting:

curl -x http://USERNAME:PASSWORD@HOST:PORT https://jesusproxy.com/ip.json
curl -x socks5h://USERNAME:PASSWORD@HOST:PORT https://jesusproxy.com/ip.json

If curl returns a US carrier IP but Dolphin Anty still reports a problem, the credentials are right and the issue is in the tool. If curl fails too, fix the login first. A clean connection check in Dolphin Anty plus a US mobile result on our lookup is the pair you are aiming for.

Dolphin gives you one extra signal the other tools do not: the check reports the time zone it reads for the IP, not just the location. Compare that against the profile's own time zone setting while you are there, because a US mobile IP in a profile claiming another region is a mismatch you can fix in seconds before you sign in anywhere.

Troubleshooting Dolphin Anty and a mobile proxy

The pasted line is rejected

Check the shape against their three accepted formats before anything else. A line that is nearly right, such as credentials in the wrong order or an extra colon, is the usual cause. Their formats are host:port, host:port:login:password and login:password@host:port.

One thing we cannot tell you from their documentation is how Dolphin handles a socks5h:// prefix, since their examples show socks5:// and the docs do not address the variant. If you copied a command-line style URL from somewhere, use the plain host-and-port form with the type set beside it and you avoid the question entirely.

The connection check fails

Almost always the port does not match the type, because HTTP and SOCKS5 are separate logins with separate ports on a Private plan. Re-copy the username and password one at a time as well, since a trailing space breaks authentication silently. Then run the curl check above: a US carrier result from curl means the credentials are good and the problem is in the profile.

The IP change button is missing

Their docs tie that button to the rotation link: it appears on the profiles screen once a change-IP link has been inserted. If it is not there, the Link to change IP field is empty, or you are on a Share plan, which has no rotation link because it rotates on its own.

No Proxy column to edit

Add it with Customize columns on the Browser Profiles screen, which is their documented answer. Then the pencil to the right of the Proxy column name gives you No proxy, New proxy, or Select a proxy.

Change Proxy in bulk is greyed out

Their docs state that mass proxy editing is available on paid tariffs only, so this is a plan limit in Dolphin rather than a fault. Until then, edit profiles one at a time with the pencil in the Proxy column.

The location is a US state I did not pick

That is normal. We cover the United States only, on T-Mobile and Verizon, in Connecticut, Georgia, Maryland, New Jersey, New York, Pennsylvania and Virginia, and there is no city targeting. Another country, though, means the profile is not using the proxy, so re-read our IP lookup inside the profile window rather than in your normal browser.

FAQ

What proxy formats does Dolphin Anty accept?

Their documentation lists three input formats: host:port, host:port:login:password, and login:password@host:port. The proxy type is chosen separately, to the left of the line, with http://, socks5:// and socks4:// shown as the examples. Paste one line rather than filling separate boxes.

Where does the rotation link go in Dolphin Anty?

In the field called "Link to change IP". Their docs say that if you have rotational proxies, inserting the link given when buying them makes an IP change button appear on the profiles screen. A JesusProxy Private rotation link is exactly that kind of link. Share has no rotation link because it rotates on its own.

Should I pick http or socks5 in Dolphin Anty?

Either. A JesusProxy Private plan gives you an HTTP login and a SOCKS5 login at the same time, so you can use whichever you prefer, as long as the port you paste belongs to the protocol you selected. Our SOCKS5 is TCP only, so UDP is not supported.

How do I check the proxy inside Dolphin Anty?

Click the arrows at the right edge of the proxy line. Their docs say Dolphin checks the connection and reports the geolocation and time zone it reads for that IP. That is a useful signal, but confirm the exit properly by loading our IP lookup inside the running profile.

I cannot find the Proxy column on the Browser Profiles screen.

Their docs cover this: add the column with "Customize columns", where you can switch on the columns you want and hide the ones you do not. Once the Proxy column is showing, click the pencil to the right of its name to add or edit a proxy on that profile.

Can I change the proxy on many profiles at once?

Their documentation says that functionality is available on paid tariffs only. When you have it, tick the profiles, then click Change Proxy in the action bar that appears at the bottom, and choose No proxy, New proxy, or Select proxy. You can also select Random and decide whether to use only proxies with the Working status or all of them.

How do I remove a proxy without deleting it?

Their docs separate the two. Set the profile's proxy to "No proxy" and the profile runs without one while the proxy stays in your saved list for later. Deleting it entirely is a different action, done from the Proxy screen by selecting it and clicking Delete on the blue action bar.

Dolphin shows the wrong time zone for my proxy. Is that a problem?

It is worth fixing before you sign in anywhere. Dolphin reports the geolocation and time zone it reads for the IP when you run the check, so compare that against the profile settings. A US mobile IP paired with a profile claiming a different region is an avoidable mismatch, and our coverage is the United States only.

The Dolphin Anty steps on this page come from Dolphin Anty's own documentation, read on 15 Nov 2026: Dolphin {anty} docs, How to add a proxy. Interfaces change, so if a button has moved, their docs are right and this page is stale. Tell us and we will re-check it.

Dolphin {anty} is a trademark of its owner. JesusProxy is not affiliated with, endorsed by, or sponsored by Dolphin Anty, and we do not resell or support their software. We sell the US mobile proxy you put into it.

Setting up a different tool? AdsPower and GoLogin have their own guides, and the integrations hub lists them all. For the accounts themselves, see the Instagram and Reddit pages. Private costs $6 for a day if you want to test the setup first.

Get a US mobile proxy for Dolphin Anty