Android proxy guide

How to Set Up a Proxy on Android

Last updated: 15 Nov 2026

Quick answer

  1. Get your four values

    From your provider: the host, the port, the username and the password. On JesusProxy they are in your dashboard as soon as the plan is paid for.

  2. Pick where it goes

    No login, Wi-Fi only? Settings, Network & internet, Internet, the gear next to your network, Edit, Advanced options, Proxy, Manual. A login, SOCKS5, or mobile data? Use a proxy app instead.

  3. Check it before you trust it

    Load our IP lookup and read the address and the network back. If it still shows your own provider, the proxy is not being used.

Before you start: what you need

A proxy is four pieces of text. The host is the server address, written as a domain name or an IP. The port is the numbered door on it. The username and password prove the connection is yours.

On JesusProxy all four appear in your dashboard as soon as a plan is paid for, along with the protocol. Keep them to yourself: when you ask for help, use HOST, PORT, USERNAME and PASSWORD instead of the real values.

HTTP or SOCKS5: which one to use

Your provider gives you one or both, and the difference decides which method below you can use.

HTTP and SOCKS5 on Android
QuestionHTTP proxySOCKS5 proxy
What it carriesWeb traffic from apps that read the system proxyAny TCP connection the app sends through it
Works in Android Wi-Fi settingsYes, without a loginNo
Username and passwordOnly through an app, not the Wi-Fi fieldsYes, through an app
On JesusProxyShare has HTTP or SOCKS5. Private has both, on separate loginsOffered on both plans. TCP only; UDP is not supported

New to this? What is a proxy server and proxy authentication explained cover the basics.

Method 1: Android Wi-Fi proxy settings (manual)

This is the setting built into Android. It takes a host and a port, applies to the one Wi-Fi network you set it on, and has no field for a username or password, so it works best with a proxy that needs no login. If yours does need one, Chrome usually pops up a box asking for the username and password, but most other apps will not, so use Method 3 instead. The steps below are the stock Android path on recent Android versions (shown on a Pixel).

  1. Open your Wi-Fi network

    Open Settings, tap Network & internet, then Internet. Your connected network is at the top of the list.

  2. Edit the network

    Tap the gear beside the network, then the pencil or Edit. Open Advanced options, which is collapsed by default.

  3. Set Proxy to Manual

    Tap Proxy and choose Manual. Two fields appear: Proxy hostname and Proxy port, plus a list called Bypass proxy for.

  4. Type the host and port

    Copy the host into Proxy hostname and the port into Proxy port. One wrong digit and nothing loads.

  5. Save and test

    Tap Save. The phone reconnects with the proxy in place. Open a browser and load a page to see whether traffic is moving.

Bypass proxy for is a comma-separated list of addresses that skip the proxy, handy for a router page or an internal site. Two things surprise people. The setting belongs to that one Wi-Fi network, so a different network, or mobile data, goes straight out again. And apps that make their own connections can ignore the system proxy completely.

Samsung (One UI) variant

Samsung puts Wi-Fi under Connections instead of Network & internet. Open Settings, tap Connections, then Wi-Fi, then the gear beside the connected network. Expand the advanced section, tap Proxy, and choose Manual. The fields are the same host and port, with the same limits: no username, no password, Wi-Fi only.

Other manufacturers move the menu too, so treat the path as a shape rather than a route: find the saved network, edit it, open the advanced section, look for Proxy. The Pixel steps above follow Google’s Pixel Help page.

Method 2: Proxy Auto-Config (PAC URL)

The same Proxy menu offers Proxy Auto-Config as well as Manual. Instead of a host and port you give Android one web address: a PAC file, a small script that says which proxy to use for which destination. Offices use it to send internal sites direct and everything else through a proxy.

  1. Open the same Proxy menu

    Edit the Wi-Fi network, open Advanced options, and tap Proxy.

  2. Choose Proxy Auto-Config

    One field appears for the PAC web address. Paste the full URL your provider or IT team gave you, ending in .pac, and tap Save.

Two limits matter. The PAC file must be reachable from the network the phone is on, so a file hosted inside an office will not load from a café, and a PAC file carries no credentials, so it cannot help with a proxy that needs a login. If you were given a host and port rather than a .pac address, use Method 1 or Method 3.

Method 3: Use a SOCKS5 or authenticated proxy with an app

This is the method most people need. Android’s Wi-Fi fields have nowhere to put a login, so SOCKS5, or any proxy with a username and password, goes into an app instead. Those apps ask for VPN permission because Android’s VPN service is the only way to capture traffic without rooting the phone, and the proxy then applies everywhere, on Wi-Fi and on mobile data.

For JesusProxy this is the documented route, since every plan uses a login. SocksDroid is the app our setup notes follow: free, open source, third-party rather than ours, and not on Google Play, so download it only from its own GitHub project page.

  1. Install the app

    Get SocksDroid from its GitHub project page, including the releases listed there.

  2. Enter the server

    It opens on its settings screen. Put your host in Server IP and your port in Server Port, taken from your dashboard rather than an example.

  3. Add the login

    Scroll down, tick Username & Password Authentication, then fill in Username and Password. Skipping the tick box is the most common reason a correct login is refused.

  4. Set the proxy type

    At the bottom, check that Proxy Type is SOCKS5 and change it if it is not.

  5. Turn it on

    Tap the switch at the top right. If Android asks to allow a VPN connection, tap OK. That request appears once per app.

Our SOCKS5 proxies carry TCP only; UDP is not supported, which matters for a few apps and games and not at all for browsing. There is no data limit, speeds are 10+ Mbps, and we recommend 1 device at a time for best results. More on SOCKS5 mobile proxy.

Private plans: WireGuard or OpenVPN instead

Private also comes with OpenVPN and WireGuard config files, a device tunnel rather than a proxy. Install the official WireGuard or OpenVPN Connect app from Google Play, import the file from your dashboard, and connect; the config carries its own credentials, so there is nothing to type. Share does not include these files.

Changing your IP is a dashboard job, not a phone one: the host, port and login stay the same, so nothing in the app needs editing. See rotating mobile proxies and the Private mobile proxy.

How to use a proxy on mobile data (4G/5G), not only Wi-Fi

The Wi-Fi proxy is stored per network, so it does nothing once the phone drops to 4G or 5G. Two ways cover mobile data, and only one is a good idea.

The APN proxy field. Android keeps carrier settings under Access Point Names, and an APN entry has Proxy and Port fields that push an HTTP proxy onto the mobile connection. We do not recommend it: editing an APN can stop mobile data working, there is still no login, many carriers lock the fields, and the carrier can reset the entry. If you try it anyway, write down the original values first.

A proxy app using Android’s VPN service. This is the one to use. The app sits in the path for the whole device, so it does not care whether the phone is on Wi-Fi, 4G or 5G, and the login is carried properly. That is Method 3, and it is why the app is worth installing even when your proxy would work in the Wi-Fi fields.

Do not confuse the connection your phone uses with the one the proxy uses. A JesusProxy exit is a real US phone on T-Mobile or Verizon, on 5G or LTE depending on signal, so your handset can sit on hotel Wi-Fi anywhere and still come out of that US carrier. The full path is on how it works.

Per-app proxy (only some apps go through the proxy)

Android has no built-in setting for “send this app through a proxy and leave the rest alone”. There are two practical ways to get close.

  • The app’s own proxy fields. Plenty of tools take their own host, port, username and password, including antidetect browsers and cloud-phone software, and only that tool uses the proxy. Match the protocol to the login: SOCKS5 details in a SOCKS5 field, HTTP details in an HTTP field.
  • Split tunnelling in a proxy app. Some apps that use Android’s VPN service let you pick which apps go through the tunnel, often called split tunnelling or per-app VPN. Where it exists it is the cleanest option, because the proxy still handles the login.

Either way, test the app you care about. An app that makes its own connections can ignore a system-wide proxy, and an app with its own proxy field ignores the system setting by design.

How to check your proxy is working

Never take the settings screen as proof: Android will happily save a proxy that does not work. Do the before-and-after test instead.

  1. Look before you connect

    With the proxy off, open our IP lookup and note the IP and the network name. That is your own connection.

  2. Turn the proxy on and reload

    Switch the app on, or save the Wi-Fi proxy, then load the same page again. Both the IP and the network should have changed.

  3. Read the network, not just the country

    On a JesusProxy plan you should see a United States location with T-Mobile or Verizon as the network. A US location on a hosting company is not a mobile IP.

The change between the two readings is the real test. If the second matches the first, the proxy is not being used and the next section is where to look. How proxies work explains what the readings mean.

Troubleshooting

No internet at all after setting a proxy

Almost always a typo in the host or port, or a proxy that needs a login typed into the Wi-Fi fields, which cannot send one. Set Proxy back to None, confirm the internet works, then re-enter the values by copy and paste. If the proxy needs a login, move to Method 3 rather than retrying here.

The login prompt keeps coming back

On the Wi-Fi method that box is Chrome asking for a login the proxy fields cannot carry, and it comes back each time the details are refused. Check they belong to the protocol you are using, since HTTP and SOCKS5 have separate logins on Private, and in a proxy app check that Username & Password Authentication is actually ticked. Watch for a trailing space from copy and paste, and for autocorrect capitalising the first letter. Remember that most apps other than Chrome never show the box at all, they just fail, which is why a proxy with a login belongs in Method 3.

The country or carrier is wrong

Usually you are not on the proxy at all, so repeat the check with it switched off and compare. If you have just rotated a Private IP, give it the 20–45 seconds it takes and reload. The Wi-Fi proxy covers one network only, so walking out of range quietly puts you back on your own IP.

DNS and what a proxy does not hide

A proxy changes the address a site sees. It is not a privacy tool. With the Wi-Fi method, apps that ignore the system proxy carry on as normal and name lookups can still go to the network you are sitting on, which is what people mean by a DNS leak. A proxy app, or the Private WireGuard or OpenVPN config, keeps more of the traffic on one path. Android’s Private DNS setting can also send lookups to its own resolver, so turn it off while you test.

Still stuck? Work down the list before buying a second plan: Share is $3 for 1 day and Private $6 for 1 day on the pricing page.

How to remove or turn off a proxy on Android

Whichever method you used, reversing it takes seconds and the phone goes back to its normal connection.

  • Wi-Fi proxy: edit that network, open Advanced options, set Proxy to None, save. Do it per network, since each remembers its own setting.
  • Proxy app: tap the switch off and the VPN key leaves the status bar. Your host, port and login stay saved, so clear the fields too if you want them gone.
  • WireGuard or OpenVPN: disconnect, and delete the imported tunnel if you are finished with it.
  • APN proxy: clear the Proxy and Port fields and save. If mobile data is still broken, reset the APN to the carrier default.

Afterwards, run the IP check once more. Sites should see the address of the network you are actually on, which confirms the proxy is out of the path.

Android proxy FAQ

Does Android support SOCKS5 proxy natively?

No. The proxy fields in Android’s Wi-Fi settings are for an HTTP proxy, and they have no place to put a username or a password. To use SOCKS5, or any proxy that needs a login, you need an app that routes traffic through Android’s VPN service, such as SocksDroid. No root is needed, because the app uses the VPN service Android gives every app.

Why does my proxy only work on Wi-Fi?

Because you set it in the Wi-Fi settings. That proxy is saved against one Wi-Fi network and applies only while you are on it. Switch to mobile data and the phone connects directly again. An app that uses Android’s VPN service covers both Wi-Fi and mobile data.

Is a proxy the same as a VPN on Android?

No. A proxy forwards traffic for the apps or the network you pointed at it, and sites see the proxy’s IP. A VPN builds an encrypted tunnel for the whole device. Proxy apps on Android often ask for VPN permission because that is the only way to capture traffic without root, but they are still forwarding to a proxy, not encrypting everything.

Can I use a mobile proxy on an Android phone?

Yes. A mobile proxy is just a host, port, username and password, so it works the same as any other proxy. Put the SOCKS5 details into a proxy app and the phone exits through a real US mobile carrier IP instead of the network you are sitting on.

How do I set a proxy in Android?

For an HTTP proxy with no login, use the Wi-Fi setting: Settings, Network & internet, Internet, the gear beside your network, Edit, Advanced options, Proxy, Manual, then enter the hostname and port. Those fields hold no login, and while Chrome usually pops up a box asking for one, most other apps will not. For SOCKS5 or any proxy with a username and password, enter the same details in a proxy app instead.

How do I disable the proxy on my Android device?

For the Wi-Fi method, edit that network, open Advanced options, set Proxy to None and save. For a proxy app, turn off the switch at the top; for a WireGuard or OpenVPN config, disconnect in the app. Traffic then uses your normal connection again.

Should I configure proxy settings on or off?

Leave them off unless you have a proxy you trust and a reason to use it. A proxy forwards your traffic, so you should know who runs it. Turn it on for the session you need, then turn it off when you are done.

What is a proxy on my phone?

A proxy on your phone is a server that forwards the phone’s traffic. Websites then see the proxy’s IP instead of the address of the Wi-Fi or mobile network you are sitting on. It applies only to the apps or the connection you pointed at it.

Which proxy is best for Android?

It depends on the job: a mobile carrier IP looks like other phones on that network, while a private IP that only you use suits a logged-in account. Proxy apps such as SocksDroid are free, but free public proxy servers are slow, shared with strangers and unsafe to put a login through. This is not a ranking of providers. If you need a real US mobile carrier IP, see our US mobile proxies.

Need a US mobile IP? Try JesusProxy

Everything above works with any provider’s proxy. If you still need the proxy, ours exits through a real US phone on T-Mobile or Verizon, on 5G or LTE depending on signal, with no data limit and instant delivery after payment.

JesusProxy on Android
FactSharePrivate
NetworkReal US mobile carrier, 5G or LTE depending on signalReal US mobile carrier, 5G or LTE depending on signal
CarriersT-Mobile and VerizonT-Mobile and Verizon
Works onBrowsers, phones and computersBrowsers, phones and computers
IP rotationAutomatic, no rotation linkRotation link, API call, or timer every 5, 15, 30 or 60 minutes. Host, port and login stay the same
ProtocolsHTTP or SOCKS5 (one protocol)HTTP and SOCKS5 (separate logins), plus OpenVPN and WireGuard config files
LoginUsername and passwordUsername and password, editable any time. No IP whitelisting needed
Prices$3 / $20 / $65 for 1 / 7 / 30 days$6 / $35 / $110 for 1 / 7 / 30 days
Last updated15 Nov 202615 Nov 2026

Share starts at $3 a day and Private, with the rotation link and its own SIM, at $6 a day. See US mobile proxies Compare plans